Product Introduction
SPF03-180 is a flexible thin film sensor with a length of 180 CM. When the external pressure is detected by the sensor, the resistance of the sensing material will change according to the pressure, and it will be converted into an electrical signal output through a simple test circuit. This product is suitable for use in large smart health monitoring products, such as off bed detection.
This flexible film pressure sensor has high sensitivity, fast response speed, and fully flexible design, and can easily adapt to the inner surfaces of complex flat or curved structures.
Sensor Characteristics
Designed and developed specifically for touch pressure sensing solutions; high sensitivity, respond to pressure below 50 gf (guaranteed 50 gf); flexible and resistant to gentle bending, fast response time, long life time, good durability, low power consumption, high impedance in standby mode; customizable sensor shape; customizable sensor range and response point.
For more information, Please check our product datasheet or send the consultation to us.
Hot Tags: Straight Flexible Force Pressure Sensor - 180CM SPF03-180, China Straight Flexible Force Pressure Sensor - 180CM SPF03-180 manufacturers, suppliers, factory, multi in one module, TVOC Gas Sensor, fixed gas detector h2s, Electrochemical Formaldehyde Gas Sensor, Carbon Monoxide CO Gas Sensor, hydrogen sulphide sensor
Technical Parameters
|
Range |
5000 gf |
|
Thickness |
0.30-0.35 mm |
|
Response Point |
10-50 gf |
|
Repeatability |
±15% (50% load) |
|
Consistency |
±15% (same batch number) |
|
Durability |
>1 million times |
|
Initial resistance |
<1 KΩ (no load) |
|
Response time |
<5 ms |
|
Test voltage |
Typical value 3.3 V |
|
Operating temperature |
<60℃ |
|
Electromagnetic Interference |
Not generate |
|
Electrostatic discharge |
Not generate |
