Product Introduction
The MMD1008 methane gas sensor module is a miniature gas sensor module developed based on MEMS methane gas sensor. It can be used to detect hydrogen gas level in air and send out alarm signals. This module has Anti-interference to common organic gas such as alcohol.
Main Application
It is suitable for smart kitchen appliances (gas water heaters, gas stoves, etc.), gas detection, fire safety, portable detectors, etc.
Sensor Module Characteristics
High sensitivity
High resolution
Low power consumption
Long life time
High stability
Excellent anti-interference ability (measured by 2000ppm ethanol interference)
Temperature and humidity compensation
Work with various communication such as UART, PWM waveform and other output pattern
Excellent linear output
Sensor Module Package
For more information, Please check our product datasheet or send the consultation to us.
Hot Tags: MEMS Methane Gas Sensor Module MMD1008, China MEMS Methane Gas Sensor Module MMD1008 manufacturers, suppliers, factory, Straight Flexible Thin Film Pressure Sensor 120CM, Fixed Type Combustible Leak Gas Detector, Semiconductor Combustible Sensor For Methane, Ammonia Gas Sensor, Air Quality Monitoring Sensor Module, Food Burnt Smell Sensor Module
|
Product Number |
MMD1008 |
|
Target Gas |
Methane (CH4) |
|
Interfering Gas |
CO |
|
Measurement Range |
500-1000ppm |
|
Maximum Concentration |
20000ppm |
|
Communication |
UART |
|
Working Voltage |
3.3 V (no polarity protection) |
|
Working Current |
≤ 30 mA |
|
Alarm Point Setting Range |
3000-10000ppm |
|
Preheat Time |
1 min |
|
Alarm Method |
Sound and light alarm, PMW signal output |
|
Response Time |
≤30 seconds |
|
Recovery Time |
≤60 seconds |
|
Resolution |
500ppm |
|
Working Temperature |
-10-55℃ |
|
Working Humidity |
15%RH-90%RH (no condensation) |
|
Storage Temperature |
-10℃～55℃ |
|
Life Time |
≥ 3 years |
|
Dimension |
20×25×9mm (L×W×H) |
