Product Introduction
The SMD1003E sensor is a high-performance, low-cost primary battery type electrochemical sensor that using advanced electrochemical sensor preparation technology. It can be adapted to high temperatures (70°C), low temperatures (-40°C ). The SMD1003E sensor complies with the various performance requirements of electrochemical carbon monoxide sensors in the US UL2034 and EU EN50291 standards.
SMD1003E has been miniaturized in design, making the sensor small in size and can be directly welded on the PCB, ensuring product life while greatly reducing product costs. This product is recommended to have a service life of 6 years and a one-year warranty. If there are any quality problems within one year, it will be returned or replaced for free.
Main Application
It can be widely used in carbon monoxide gas detection and fire detection in civilian households in high and low humidity environments.
Sensor Characteristics
● Very small size
● Low power consumption
● Low Cost
● Good stability
● Long life time
For more information, Please check our product datasheet or send the consultation to us at any time.
Hot Tags: Electrochemical Carbon Monoxide Gas Sensor SMD1003E, China Electrochemical Carbon Monoxide Gas Sensor SMD1003E manufacturers, suppliers, factory, e nose odour, hydrogen detection sensor, Noxious Sensor, NH3 Sensor, Electrochemical CO Detection Module, Hydrogen Sulfide H2S Sensor
|
Sensor Number |
SMD1003E |
|
Working Principle |
Double Electrode Electrochemical |
|
Target gas |
Carbon monoxide |
|
Measurement Range |
0-1000ppm |
|
Maximum overload |
2000ppm |
|
Detection Life: |
6 years under normal use |
|
Output Signal |
3~9nA/ppm |
|
Resolution |
0.5ppm |
|
Repeatability |
<2% output value |
|
Temperature Range |
-20℃ to 60℃ |
|
Humidity Range |
15%-90%RH |
|
Pressure Range: |
Standard atmospheric pressure ±10% |
|
Response Time |
T90≤60 seconds |
|
Zero Drift |
< ±10ppm (-40℃~+70℃) |
|
Long-term Drift |
<5%/year |
|
Recommended Load |
200 ohms (depending on different circuits) |
